888.243.9445 M-F 6AM-7PM CT

Free shipping over $500

E-HC1H151Z | e-conolight

150W HPS | 15,000 Lumens Floodlight | Dark Bronze

$29.82
SKU: E-HC1H151Z
Review configuration
NOT AVAILABLEDiscontinued
Ratings
Details
Specs & Guide
Accessories
Reviews
Q&A

Overview

150-watt HPS Floodlight with 15,000 lumens. Dark Bronze, UL Listed, 1-year limited warranty, free shipping over $500.

Features

  • Sturdy die-cast aluminum housing and lens frame, with dark-bronze polyester powder-coat finish
  • Tempered-glass lens is thermal, shock and impact resistant
  • 1/2" NPS die-cast swivel fitter
  • Anodized aluminum reflector
  • UL Listed for wet locations
  • Notice:

    Fluorescent and some high intensity discharge (HID) lamps contain mercury, a hazardous substance regulated by Federal and State laws. Lamps that contain mercury will be marked with a circled "Hg" and “Contains Mercury”. These lamps must be recycled or disposed in accordance with local, state or federal law. For more information visit www.lamprecycle.com. If you are not the end user of these lamps you may be required by law to inform the purchaser that these lamps contain mercury and must be properly disposed or recycled. Check your State and Local laws for compliance.

    Recommended Use

  • Building facades
  • Displays
  • Signage
  • Security
  • Storage area lighting
  • Typical mounting height

    8 to 20 feet
    LIGHT OUTPUT
    15000
    POWER CONSUMPTION
    150W
    COLOR ACCURACY
    22 CRI
    DIMENSIONS
    6-1/4" x 9-1/8" x 6-1/8"
    SHIPPING WEIGHT (LBS.)
    6.56
    • 150 Watt HPS, Medium Base, Clear
      150 Watt HPS, Medium Base, Clear
      $3.50
    • Conduit Slip Fitter - Dark Bronze for Premium Compact Floodlight
      Conduit Slip Fitter - Dark Bronze for Premium Compact Floodlight
      $17.99
    150W HPS | 15,000 Lumens Floodlight | Dark Bronze is rated 4.5 out of 5 by 4.
    Rated 5 out of 5 by from Great product. Exactly as described. Bought 8 of these light to build a bowfishing setup on my 1548 flat bottom boat. Work just like i needed and very bright.
    Date published: 2017-02-15
    Rated 4 out of 5 by from Decent HPS floodlight for the money Purchased 2 of these fixtures to light my front and back yard. Mounted them at approximately 15' and covers a large area. They're good fixtures except the fitter thread casting is a little weak, ended up stripping one of them but made it work in the end. Good HPS fixture, hard to beat the high lumen output of a HPS lamp.
    Date published: 2013-11-20
    Rated 4 out of 5 by from Cheap and bright I purchased these for bowfishing. They are very bright. The cases are plain but meet the need. Easy to wire and the adjustable leg seems to work well. They don't get as hot as I thought they would.
    Date published: 2017-05-01
    Rated 5 out of 5 by from Super bright Great light at a low cost! Lightning fast shipping!
    Date published: 2017-02-16
    • y_2017, m_7, d_19, h_2
    • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_4
    • loc_en_US, sid_E-HC1H151Z, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
    • clientName_econolight

    Was wondering if the 150 watt bronze hps were gonna come back in stock and if not do y'all have a different option for them?

    Asked by: Billy84
    All of our HID fixtures are discontinued and we aren't carrying them anymore. The LED option for these fixtures are the E-HL7 series. http://www.e-conolight.com/catalogsearch/result/?q=e-hl7
    Answered by: Sam S
    Date published: 2017-06-14

    Will these ever be for sale again?

    Asked by: Fiselk
    Unfortunately this fixture will not. We do have floodlights in an LED product. http://www.e-conolight.com/
    Answered by: Diana T
    Date published: 2017-04-26

    Do the 150w hps lights have caps in them? What are the start up and running amp draws? Want to hook 6 up to a 3200w generator with 3 on each 20amp breaker for bowfishing. Will these work?

    Asked by: Smalz
    The starting and running amperage depends on the input voltage. This fixture, at 120V is will require the most, starting amps at 2.4 and running is 1.55. On a 20 amp breaker you typically do not want to exceed 80% of the load, or 16 amps for your 20 amp circuit. You should be fine with 3 per circuit. Please see attached ballast line current data below. http://www.e-conolight.com/media/resource_center/guides/files/BALLAST_DATA.pdf If you have any other questions, please contact Customer Service at 888.243.9445
    Answered by: C Yuhas
    Date published: 2017-04-11

    Do these lights have a ballast in them?

    Asked by: Jamie23
    This fixture includes a 120-volt Reactor ballast NPF.
    Answered by: Lauren P
    Date published: 2017-03-31

    What is the dofference between these and the $49 ones?

    Asked by: Tristan
    The fixtures are part of two different series (E-HC1 Series & E-HC2 Series). The main difference between the two products in question is the size. This products' dimensions are: 6-1/4" x 9-1/8" x 6-1/8". Whereas, the other product in question has the following dimensions: 9-1/4" x 9-1/4" x 7-1/8".
    Answered by: Lauren P
    Date published: 2017-03-31

    Is there any way I can buy just the entire lens for the light because one of mine fell off and now I have nothing protecting the light

    Asked by: Dakran
    This product is discontinued and available only while supplies lasts. Our lead times change frequently. For availability on any replacement parts, please utilize our WebChat for immediate assistance, or call our customer service department at 1-888-243-9445. Please reference the sku number of this product when asking for replacement parts, so the accurate parts can be inquired on.
    Answered by: Janelle V
    Date published: 2017-02-15

    Do these lights come with capacitors and/or are the HPF rated? 

    Asked by: Quinn
    This fixture does not come with a capacitor. It has a 120V NPF (normal power factor) only ballast. Normal power fixtures would not include a capacitor.
    Answered by: Janelle V
    Date published: 2017-01-27

    will a Honda 1000 generator run 6 of these lights?

    Asked by: texas1990
    Here’s the ballast information to help determine if 6 fixtures on a Honda 1000 generator is acceptable. System wattage is 170W, starting amps 4.5, operating amps 3.3. If additional assistance is needed, please contact customer service at 888-243-9445 to speak with one of our application engineers, or contact your local electrician.
    Answered by: Lauren P
    Date published: 2016-10-19
    • y_2017, m_7, d_18, h_23CST
    • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_44
    • loc_en_US, sid_E-HC1H151Z, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_econolight