888.243.9445 M-F 6AM-7PM CT

Free shipping over $500

Posts tagged 'DLC certified'

RSS Feed

Connecticut Utility Lighting Rebates Add Up to Bigger, Brighter Savings

By Heather Asiyanbi April 8, 2014 1548 Views No comments

 

Product NameFinished Good Number
2x2 LED Troffer
2x4 LED Troffer 5" & 6" LED
Recessed Retrofit
E-T6C1142WW E-T6C1143WW Low-Profile
LED Canopy
E-CP2L04CW E-CP2L03CW E-CP2L04CS LED Parking
Garage Light
E-PG1L08CS LED Exit Signs E-XMDGB2W E-XMDRB2RCW E-WMDGB2RCW E-XPDRBW E-XPDGBW E-XESRBA E-XESGBA E-XEDRBA E-XEDGBA E-XERC E-XERW 2-Lamp T8
Linear Fluorescents
E-LP2T8W Series E-LP2T8S Series 4-Lamp T8
Linear Fluorescents
E-LP4T8W Series E-LP4T8S Series

Utility customers in Connecticut who upgrade their lighting to more energy efficient fixtures can reap rewards on both their energy bills and through rebate incentives.

Connecticut Light & Power and United Illuminating both offer significant rebates for reducing wattages by at least 10 percent. Taking advantage of this program is as easy as filling out a form.

The form and instructions are easily accessible through an online PDF that can be filled out on a computer and then printed. UI customers should take note that an additional UI Substitute W9 is required and can be found at www.uinet.com/hvac.

Section I: Customer Facility Information is the project information, where you fill in your customer's information. Every box must be filled out in order for the rebate form to receive consideration.

 

Section II: Enter your information, filling out every box with the applicable information.

 

Section III: Check the appropriate box for where the rebate/credit should go; to your customer; to you; or applied as a credit on your customer's electric account.

 

Section IV: One side of the table is dedicated to your project's current lighting scheme while the other side of the table needs to include all available information about the new lighting scheme you're installing. The measure code can be found on page 3 of the form. THERE MUST BE AT LEAST A 10% WATTAGE REDUCTION FOR EACH FIXTURE FOR THE REBATE TO APPLY.

 
 


In addition to the rebate form, contractors/customers need to mail a copy of the invoice for the project as well as their e-conolight receipt. The rebate form requires a customer's signature (this could be either the contractor or the customer's if they are placing the order themselves).

The Best LED Troffer Your Money Can Buy

By Heather Asiyanbi March 21, 2014 1601 Views No comments

LED lay-in troffers offered by e-conolight deliver brighter light, superior color and big savings because they were designed and built around light.

LED troffer side-by-side

Unlike competitors’ troffers that have been retrofitted to accommodate LEDs, troffers at e-conolight.com have been rebuilt from the ground up. Designing the fixture around the LEDs creates even light distribution in either a warm, white light or a neutral, white light. Colors are rendered true at 80 CRI, and at just 38W for the 2 x 2 and 50W for the 2 x 4, respectively, the energy cost savings over traditional lighting is significant.

LED troffers offered by e-conolight are also built to last and for easy installation. Fixtures are expected to last for up to 50,000 virtually maintenance free hours, feature a totally enclosed housing, and can be replaced on a 1-for-1 basis in existing T-bar grid ceilings.

Additionally, these LED troffers are both UL listed and DLC (Design Light Consortium) certified, which means they’re eligible for energy rebate programs offered by utility companies in several states.

More, the troffers are priced for increased savings; the more you buy, the more you save. Single units start at just $124.90.