888.243.9445 M-F 6AM-7PM CT

Free shipping over $500

LED Floodlight (Large) - 87 Degrees, 12,300+ Lumens | e-conolight

$279.99
Reg. $299.99
SKU: E-HL8F15

* Required Fields

 
Ratings
Details
Specs & Guide
Accessories
Reviews
Q&A

Overview

Replaces 250-watt pulse start metal halide (PSMH). 150-watt LED Floodlight with wide (87°) beam angle and 12,300+ delivered lumens. Available in cool white (5000K) and neutral white (4000K). 5-year limited warranty.

Features

  • Tempered glass lens, thermal shock and impact resistant, polycarbonate reflector
  • Non-dimmable
  • UL listed for wet locations
  • Recommended Use

  • Building facades
  • Security
  • Uplighting for signs and displays
  • Typical mounting height

    15'-25'
    COLOR ACCURACY
    ≥ 70 CRI
    DIMENSIONS
    14-5/8" x 12-3/4" x 7-3/8"
    LIFESPAN
    146,000 hours
    INPUT VOLTAGE
    Universal Voltage (120V-277V)
    OPERATING MINIMUM
    -40°C (-40°F)
    • 90° Wall Mount Bracket with Tenon
      90° Wall Mount Bracket with Tenon
      $36.99
    LED Floodlight (Large) - 87 Degrees, 12,300+ Lumens | e-conolight is rated 5.0 out of 5 by 10.
    Rated 5 out of 5 by from more light in dark areas I have used these lights in many different areas on my campus and they work great and I am still buying these. I am almost done lighting up all of my dark areas of our parking lots... Reusing my existing old pole lights and buying bullhorns and mounting these on top of old poles and low voltage from The LED saves me money. They are very bright and you can direct the beam of light so if you have neighbors that may complain about the light you can direct it away from them. You can use these on 120/277/240 volts. can not say enough about them. I am still waiting to see how long they last and will write in at a later date to see.
    Date published: 2016-05-05
    Rated 5 out of 5 by from Wide Beam Flood Light My customer replaced 500 watt quartz halogen that were constantly burning out. He is very happy with the wide beam coverage and energy savings.
    Date published: 2017-06-13
    Rated 5 out of 5 by from Very well made Easy to install even brighter then I expected will use econolight again
    Date published: 2017-04-02
    Rated 5 out of 5 by from Great replacements We're using these as replacements for 400 watt HPS fixtures on 35 foot poles. They do a great job of lighting up the areas and cutting the wattage consumed by a huge amount.
    Date published: 2017-03-05
    Rated 5 out of 5 by from Very nice fixture! I bought two of these to replace a couple of Crouse Hinds that were burned out and had bad ballasts too. They've been burning a year now without any issues.
    Date published: 2016-12-02
    Rated 5 out of 5 by from Great light These lights are super bright and I have had good success with this light fixture.
    Date published: 2017-04-28
    Rated 5 out of 5 by from Turns night into day! Swapped out 400 watt MH fixtures and they are much better than the old lights.
    Date published: 2017-04-07
    Rated 5 out of 5 by from great light these lights are the best buy for the price. you will not find a better light
    Date published: 2017-05-27
    • y_2017, m_6, d_17, h_6
    • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_10
    • loc_en_US, sid_E-HL8F15, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
    • clientName_econolight

    Can this unit be attached to a wooden telephone pole?

    Asked by: DanSMYC
    Our fixtures are designed to fit on a 2 3/8" tenon, usually on a steel or aluminum pole. If you safely attach a tenon then it would work on a wood pole.
    Answered by: Sam S
    Date published: 2017-06-07

    Can you remove the slip fitter and mount this light to a 6" mounting arm?

    Asked by: Fredrock
    Unfortunately no, these fixtures are designed to just have the 2 3/8" slip fitter only.
    Answered by: Sam S
    Date published: 2017-05-16

    looking for carp boat lights....

    Asked by: david klein
    Best fixture to use for this would be a high pressure sodium fixture (HPS), here is one that we have in stock, E-HC2H151Z, as of this moment but it is discontinued and will no longer be available once its gone. http://www.e-conolight.com/outdoor-lighting/floodlight/150-watt-hps-floodlight-9-x-9.html
    Answered by: Sam S
    Date published: 2017-05-16

    Do you have a spec sheet for the light pattern this produces?

    Asked by: doug h
    The spec sheet is located under the specs and guides for the product. http://www.e-conolight.com/pdf/SpecSheets/eco_spc_hl8_series.pdf For photometrics use the lighting layout tool we have on our site. http://www.e-conolight.com/lightinglayout
    Answered by: Sam S
    Date published: 2017-04-20

    I am looking to use (2) of these on a pole 18' high to light up a small home basketball/tennis court that is 30' x 60'. Would this be enough light? And, should I go with Cool White or Natural White?

    Asked by: doug52748
    To determine the light spread for your application space, please see our Outdoor Lighting Layout Tool, and use our Outdoor Calculator: http://www.e-conolight.com/resource_center/resources/lighting-layout-tool. The kelvin temperature is generally a preference determined by the customer's liking. A 4000K is a whiter light, similar to the color of a PSMH. Whereas the 5000K is closer to daylight, but may have bluer hues to the color temperature of the light. If further assistance is needed, please contact customer service at 888-243-9445 to speak with one of our application engineers.
    Answered by: Janelle V
    Date published: 2017-02-23

    I'm replacing some lights that are mounted on 2" round pipe, I believe the OD would be 2-3/8". The picture shows a square mount slip fitter. Do these work on that round pipe or would I need an adapter?

    Asked by: DerekB
    The mounting on this fixture is a 2 inch adjustable slipfitter. It is intended to slide over a 2-3/8" outer diameter round tenon. The outside of the slipfitter appears square to match our square poles of they are being used together. For any additional questions, please contact our customer service department at 1-888-243-9445.
    Answered by: Janelle V
    Date published: 2017-02-09

    Our existing pole has a 2" OD mounting arm. Does Econo-Lite have a square to round adapter?

    Asked by: Ritch
    We do offer a 4" square pole mount with 2-3/8" O.D. tenon (E-ACPB1A4Z). This fits over 3-1/2" O.D. square.
    Answered by: Lauren P
    Date published: 2017-01-16

    My name is Bruce Shannon. I need a LED flood light that I plan on mounting on the side of a rectangular bollard/light to illuminate a flag pole that is 30' high. Distance between the light and top of the pole is ~30' What would you recommend.

    Asked by: Bruce Shannon
    For assistance on pole heights over 25', please contact customer service at 888-243-9445 to work with one of our application engineers.
    Answered by: Lauren P
    Date published: 2017-01-16
    • y_2017, m_6, d_16, h_21CST
    • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_45
    • loc_en_US, sid_E-HL8F15, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_econolight