888.243.9445 M-F 6AM-7PM CT

Free shipping over $500


5" Vertical Recessed 26W CFL Lamp (Electronic) Non-IC

Review configuration
In stock
Specs & Guide


5-inch Vertical Lamp Compact Fluorescent, Type Non-IC, New Construction Housing for (1) CFL double- or triple-tube 26W lamp (Lamps not included) 120V through 277V electronic HPF ballast. While Supplies Last


  • Lamps are NOT included
  • Ceiling Cut-Out: 5-3/4 in.
  • Plaster Frame: 7-5/8 in.W x 12-1/2 in.L
  • Lamp: One 26W
  • Lamp Base: 4-pin G24q-3 or GX24q-3
  • 120V through 277V electronic HPF ballast
  • Min. Starting Temp. -18 degree C (0 degree F)
  • UL, cUL listed for use in damp locations (wet location trims available)
  • Thermally protected universal voltage (120V through 277V) electronic ballast with end-of-lamp-life protection
  • J-box is listed for eight (4in - 4out) No. 12AWG (90 degrees C) through-branch circuit conductors and has five 1/2 in., one 3/4 in. and four Romex knockouts with true pry out slots
  • Romex knockouts include built in strain relief - no additional clamps required
  • Pre-installed hanger bars allow housing to be positioned at any point within 24 in. joist span. Score lines provided for easy field shortening to accommodate 12 in. joist span
  • Hanger bars can easily be field repositioned 90 degrees on the plaster frame
  • Hanger bars are designed to fit on to T-Bar spine for quick alignment and can be permanently secured without the need for additional clips
  • Housing adjusts for ceilings up to 1-3/8 in. thick
  • 7-1/4 in. housing height allows for use in 2 in. x 8 in. joist construction
  • 2-year warranty
  • Recommended Use

    For use in non-insulated ceilings or where insulation can be kept 3 in. from housing.
    -18°C (0°F)
    There are no accessories for this product.
    5" Vertical Recessed 26W CFL Lamp (Electronic) Non-IC 0 out of 1 5 based on ratings. user reviews.