888.243.9445 M-F 6AM-7PM CT

Free shipping over $100

LED Area Light - Type III, 12,500+ Lumens | e-conolight

Reg. $249.99
SKU: E-AL1L315

* Required Fields

Specs & Guide


Replaces 250-watt pulse start metal halide (PSMH). 155-watt LED Area Light - Type III with 12,500+ delivered lumens. Available in cool white (5000K) and neutral white (4000K). 5-year limited warranty.


  • Order mounting separately (E-ACE 6” mounting arm, E-ACU U-bracket, or E-ACS 2”slip fitter)
  • Estimated 76,000 hours of maintenance-free operation to L70
  • Non-dimmable
  • Low-copper, durable die-cast aluminum housing
  • Dark bronze polyester powder-coat finish for extra corrosion protection
  • Fixed cutoff glare shield reduces light pollution
  • Tempered glass lens, thermal shock and impact resistant
  • Patented lens design delivers IES Type III distribution
  • Mounts directly to recessed junction box with included mounting plate
  • Operating temperature range: -22°F - 104°F
  • Universal voltage (120V through 277V)
  • UL listed for wet locations
  • For use in 0° orientation (downlight position) only
  • Fixture comes without mounting, ordered separately
  • Cree® LEDs inside
  • Recommended Use

    Parking lots, roadways, walkways, and general area lighting. Also effective as a wall-mounted security and perimeter light.

    Typical mounting height

    15 to 25 feet
    10,880 lumens
    ≥ 70 CRI
    4-7/8" x 13-7/8" x 17-1/4"
    120V - 277V
    • Photocell - Button, 208V/240V/277V
      Photocell - Button, 208V/240V/277V
    • 2" Adjustable Slip Fitter
      2" Adjustable Slip Fitter
    • 6-inch Mounting Arm | E-AL1L, E-AL2L, E-APA
      6-inch Mounting Arm | E-AL1L, E-AL2L, E-APA
    • $12.99
    • Photocell - Button, 120V
      Photocell - Button, 120V
    LED Area Light - Type III, 12,500+ Lumens | e-conolight is rated 4.0 out of 5 by 5.
    Rated 1 out of 5 by from Expect a short driver life Purchased 8 month ago-but had to wait to install a few months later. Already 1/2 of a fixture is out (driver failure). although there's a 5 year warranty-Apparently I voided that by enlarging the 2 mounting holes to retrofit to existing pole brackets. My bad-but just beware. Econolite does not have the replacement driver so I'm out of luck on this. Have to buy another whole fixture and hope the others last the 5 years I promised the client.
    Date published: 2016-05-18
    Rated 5 out of 5 by from Parking Lot LED's Just installed 4 of these lights and they really lit up the area. The tech staff were also helpful in helping me decide. I have purchased many LED upgrades and all have decent quality.
    Date published: 2014-12-04
    Rated 5 out of 5 by from great pole lights I mounted two of these on a pole and they do an amazing job.
    Date published: 2014-12-11
    Rated 4 out of 5 by from Great Look Bought and installed October 2015 in church parking lot where my scout's meet. They love them and the savings.
    Date published: 2017-02-09
    Rated 5 out of 5 by from Great product This was bought to replace a HID fixture and the customer is thrilled!!
    Date published: 2017-08-18
    • y_2018, m_1, d_16, h_9
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.6
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_5
    • loc_en_US, sid_E-AL1L315, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
    • clientName_econolight

    I've been installing this fixture in a development and need (8) more to match the others. Do you have any suggestions.

    Asked by: bobby b
    This fixture has a new generation replacement. The newest generation replacement is our E-APA12 series. Here is the spec sheet for our E-APA12 series LED area light: http://www.e-conolight.com/pdf/SpecSheets/eco_spc_area_apa12_series.pdf. For additional questions, please call our customer service department at 1-888-243-9445.
    Answered by: Janelle V
    Date published: 2017-12-29

    Do you have a replacement for E-AL1L315CZ?

    Asked by: SLMS
    The E-APA12A-C350Z is the newer generation of this fixture that has replaced the E-AL1L315CZ fixture. Here is a copy of the spec sheet: http://www.e-conolight.com/pdf/SpecSheets/eco_spc_area_apa12_series.pdf. For additional questions, please call our customer service department at 1-888-243-9445.
    Answered by: Janelle V
    Date published: 2017-10-25

    can the 6" arm E-ACE SB be used with the E-AL1L315CZ ? Do you recomend or offer surge protectors for these LED ?

    Asked by: Rstrale
    We do not sell surge protectors or electrical panels. This product would need to be sourced though a local electrical supply house. The E-ACESB cannot be used with the E-AL1L fixtures. If a mounting arm is needing to be used with the E-AL1L fixture, you would need to use the E-ACE. For additional questions or concerns, please call our customer service department at 1-888-243-9445
    Answered by: Janelle V
    Date published: 2017-10-05

    For area concerned about "light trespass", but needing lights along paths, would this fixture be a good choice?

    Asked by: Emily
    It just depends on how much light you need in that area. Contact Customer Service at 1-888-243-9445 so they can go over some options with you
    Answered by: Diana T
    Date published: 2017-06-30

    we want the E-al1l area light, square pole and photocell. do we order the "TDB" and 2" slip fitter to get this configuration? Kelvin, Hultz/BHU eng inc., Tacoma, WA

    Asked by: kelvin
    Yes that is correct. You need the TDB option for the pole which adds a tenon top to it. Then the slip fitter goes right on that tenon.
    Answered by: Sam S
    Date published: 2017-06-12

    A t 10 ft. height what area is covered? Wall mounting? Wattage used?

    Asked by: Lloydj
    Wattage usage for this is 155w. It can be wall mounted using the wall mount plate, E-ACWM3DB, and the mounting arm, E-ACE. To check the specific distribution area at 10 feet take a look at our lighting layout tool here: http://www.e-conolight.com/resource_center/resources/lighting-layout-tool
    Answered by: Sam S
    Date published: 2017-05-23

    Is there a version of this light that can be tilted. I need the light projected forward, I do not need lighting behind. Or would a different light be better for my application?

    Asked by: Hsteve
    We offer area lights that can be tilted 0°-90°. They are our LED Shoebox-Style Area Lights. To view them on their product pages, please click on the links below. E-SBA3 Series: http://www.e-conolight.com/catalogsearch/result/?q=e-sba3 E-SBA5 Series: http://www.e-conolight.com/led-shoebox-style-area-light-type-v-16-900-lumens.html?cct=5251&finish=5311#configtop
    Answered by: Lauren P
    Date published: 2017-05-22

    I need to replace a driver on one of these fixtures. Where can I go to find one?

    Asked by: RRRR
    We do not offer replacement parts for this product. This fixture does come with a 5 year limited warranty that would cover a fixture for fixture replacement. For warranty claims, please call our customer service department at 1-888-243-9445.
    Answered by: Janelle V
    Date published: 2017-02-23
    • y_2018, m_1, d_16, h_9CST
    • bvseo_bulk, prod_bvqa, vn_bulk_2.0.6
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_61
    • loc_en_US, sid_E-AL1L315, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_econolight