888.243.9445 M-F 6AM-7PM CT

Free shipping over $500

Replaces 150W | 2300 Lumens LED Motion Security Light E-MS Series

Reg. $79.99

* Required Fields

Specs & Guide


Replaces 2 x 75W Incandescent Par 30 lamps. 28-watt LED Motion Security Light with 2300 delivered lumens. 5-year limited warranty.


Motion Sensor:
  • 180° motion detection range
  • 15’ to 40’ sensitivity adjustment for motion detection
  • 10 second to 8 minute time delay adjustment
  • Ambient light level adjustment for day or night operation
  • Housing:
  • Die-cast aluminum housing with integrated heat sink fins for optimal thermal management
  • Available in gray or white polyester powder-coat finish
  • Lens Assembly:
  • Glass diffuser lens with white polycarbonate reflector for reduced glare
  • Mounting:
  • Mounts directly to recessed junction box with included mounting plate
  • ETL Listed:
  • Wet locations
  • Recommended Use

  • Motion-activated security
  • Residential / commercial yards
  • Receiving areas
  • Storage facilities
  • Typical mounting height

    7 to 10 feet
    2300 Lumens
    28W LED
    ≥ 70 CRI
    5" H x 6-2/5" W x 9" L
    Estimated >57,000 hours of maintenance-free operation to L70 at 25˚C (77˚F)
    120V Operation
    -20˚C (-4˚F)
    There are no accessories for this product.

    can heads be re-located to different base. Are they individually dimmable. Are they available for single purchase. I need 14 for retrofit job

    Asked by: Fred F
    The heads are not detachable and the fixture is non-dimmable. http://www.e-conolight.com/pdf/SpecSheets/eco_spc_ms1l_series.pdf Please contact customer service at 888.243.9445 if you have further quesions.
    Answered by: C Yuhas
    Date published: 2017-04-11

    Can the spots be turn on and off independently from the motion detector?

    Asked by: Breezy
    The motion sensor on this fixture would control both light heads. Here is a copy of the instructions: http://www.e-conolight.com/pdf/Instructions/LPN00321X0001A1_A.PDF. For additional questions please contact our Customer Service Department at 1-888-243-9445.
    Answered by: Janelle V
    Date published: 2017-02-06

    Are the led bulbs replaceable?

    Asked by: Weezy
    This fixture does not contain bulbs - it is operated by an LED module, which cannot be replaced. If a part of the fixture fails, the whole unit must be replaced.
    Answered by: Lauren P
    Date published: 2016-12-15

    Is the model E-MS1L021NG also supervised by a photocell so that one can have it NOT turn on due to motion during the day?

    Asked by: Large Paul
    A photocell is not included with this fixture. However, the fixture can be adjusted to only illuminate at night, when prompted by the motion sensor. For more details on the motion sensor settings, please see the instruction manual: http://www.e-conolight.com/pdf/Instructions/LPN00321X0001A1_A.PDF.
    Answered by: Lauren P
    Date published: 2016-11-09

    I have an e-conolight E-MS series, SKU: E-MS1L021NW, LED Flood light with a motion sensor. I am trying to find out how to override the motion sensor to allow the light to remain in the on position.

    Asked by: Toots
    The motion sensor on this fixture cannot be overridden. However, the motion sensor can be set to also be used during the daytime. Please see the bottom of the instruction manual for more details on the motion sensor settings: http://www.e-conolight.com/pdf/Instructions/LPN00321X0001A1_A.PDF.
    Answered by: Lauren P
    Date published: 2016-09-20
    • y_2017, m_6, d_27, h_4CST
    • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_5
    • loc_en_US, sid_E-MS1L, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_econolight