For standard (non-emergency) hard wire fixtures, the electronic ballast auto-senses voltages 120V, 208V, 240V, or 277V.
For standard (non-emergency) fixtures with a cord & plug, please specify voltage (120V, 208V, 240V, or 277V). The cord is a three-wire cord, six feet long. The 120V option can be ordered with a twist-lock plug or a standard straight-blade plug.
For hard wired fixtures with emergency ballasts, you can hard wire to either 120V or 277V.
For fixtures with emergency ballasts and with a cord & plug, please specify voltage (120V or 277V). The cord is a four-wire cord, six feet long.
For hard wired fixtures with emergency ballasts AND a motion sensor, you can hard wire to either 120V or 277V.
If ordering fixtures with emergency AND a motion sensor you have the option of a 3-wire cord or a 4-wire cord. If choosing a 3-wire cord, power must always be supplied to the fixture. The motion sensor can be switched to low mode or off. If choosing a 4-wire cord, a 4th unswitched lead must be provided to the fixture.