888.243.9445 M-F 6AM-7PM CT

Free shipping over $100

LED Wall Mount E-WW3 Series | Replaces 100W | e-conolight

Replaces 120W | 1400 Lumens LED Wall Mount E-WW3 Series | 5000K | Medium Bronze

Reg. $74.99
Review configuration
In stock
Specs & Guide


Replaces 120-watt incandescent. 20-watt LED Wall Mount with 1400 delivered lumens. 5000K, medium bronze, UL Listed, 5-year limited warranty, free shipping over $100.


  • High impact polycarbonate housing in medium bronze and heavy-duty aluminum mounting plate
  • Lens Assembly:
  • UV-stabilized polycarbonate prismatic refractor
  • Mounting:
  • Knockout provided on back of housing for 1/2" conduit entry or mounts over a 4" square or octagonal junction box
  • UL Listed:
  • Wet locations
  • Recommended Use

  • Security
  • Stairways
  • Perimeter lighting
  • Typical mounting height

    8 to 12 feet
    1400 Lumens
    Cool White (5000K)
    ≥ 70 CRI
    120W Incandescent
    12-3/5" H x 7-3/4" W x 4-3/5" D
    Estimated >50,000 hours of maintenance-free operation to L70 at 25˚C (77˚F)
    120V operation with built-in photocell
    -40˚C (-40˚F)
    There are no accessories for this product.
    Replaces 120W | 1400 Lumens LED Wall Mount E-WW3 Series | 5000K | Medium Bronze is rated 3.0 out of 5 by 1.
    Rated 3 out of 5 by from No description Data on this product does not indicate where the hole for attaching electrical wires is located. Unfortunately my hose box was 3 1/2 " from eve this product is 5 1/2 inches form top of this wall mount. Did not return due to cost of shipping back to e-conolight.
    Date published: 2017-12-07
    • y_2018, m_1, d_19, h_7
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.6
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_1
    • loc_en_US, sid_E-WW3L21CMP, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
    • clientName_econolight

    Will these wall packs work with 277 Volts?

    Asked by: Josh Sparks
    This fixture is rated to operate at 120V only.
    Answered by: Janelle V
    Date published: 2017-10-05

    When this light goes out will I need to to replace the entire fixture?

    Asked by: Brandy
    This fixture is rated for 50,000 hours of maintenance free operation. There is a 5 year limited warranty on this fixture as well. This would cover a fixture for fixture replacement, as we do not offer replacement parts. Outside of the warranty, if the fixture stops working, a newer fixture would need to be purchased. Here is a copy of the spec for convenience: http://www.e-conolight.com/pdf/SpecSheets/eco_spc_ww3l_series.pdf. For additional questions, please utilize our WebChat or call our customer service department at 1-888-243-9445 for immediate assistance.
    Answered by: Janelle V
    Date published: 2017-09-07

    What is the size of fixture

    Asked by: Alice
    DIMENSIONS 12-3/5" H x 7-3/4" W x 4-3/5" D Should you need further assistance please contact customer service at 1-888-243-9445
    Answered by: Diana T
    Date published: 2017-06-23

    Can the photocell be bypassed on this fixture?

    Asked by: jpn955
    This fixture is not sold without a photocell, however, the photocell can be bypassed. However, the photocell cannot be removed. For additional questions, please call our customer service department at 1-888-243-9445.
    Answered by: Janelle V
    Date published: 2017-02-27

    Do any of these lights have a motion sensor in them?

    Asked by: Gregor
    All of our wall mounts are offered with built-in photocells, but are not operated by a motion sensor. The E-MS1L Series (http://www.e-conolight.com/led-motion-security-light-2300-lumens.html?cct=5271&finish=6001#configtop) is our only outdoor motion sensor operated fixture.
    Answered by: Lauren P
    Date published: 2017-01-16

    Is there 1/2" knock outs on each side for conduit?

    Asked by: E Squared
    This fixture has a center conduit knockout. For a visual, please see the spec sheet: www.e-conolight.com/pdf/Instructions/LPN00310X0001A0_A.PDF
    Answered by: Ashley H
    Date published: 2016-11-01

    Can you email me the photo metric of E-WW3L21CMP? Thanks.

    Asked by: Geng Liu
    The photometrics for this fixture can be found on the IES file, provided on the product page: http://www.e-conolight.com/pdf/photometrics/E-WW3L21CMP.IES. If this file is not compatible with your computer software program, photometrics may also be found on our Outdoor Lighting Layout Tool: http://www.e-conolight.com/lightinglayout.
    Answered by: Lauren P
    Date published: 2016-10-11
    • y_2018, m_1, d_19, h_7CST
    • bvseo_bulk, prod_bvqa, vn_bulk_2.0.6
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_7
    • loc_en_US, sid_E-WW3L21CMP, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_econolight