888.243.9445 M-F 6AM-7PM CT

Free shipping over $100

Replaces up to 400W | 16,100 Lumens LED Shoebox Area Light E-SBA3 Series | Dark Bronze


* Required Fields

Specs & Guide


Replaces 320-watt pulse start metal halide (PSMH) / 400-watt metal halide (MH). 119-watt LED Shoebox-Style Area Light - Type III distribution - with 16,100 delivered lumens. Dark bronze, UL Listed, 5-year limited warranty, free shipping over $100.


  • Durable, die-cast aluminum housing with heat dissipating fins
  • Dark bronze polyester powder-coat finish
  • Lens Assembly:
  • Optimized Type III optics for uniform light distribution
  • Mounting:
  • Fixture comes without mounting (sold separately)
  • For optimum fixture performance, no tilt recommended
  • Can be tilted 0°-10° if desired
  • Do NOT use as an uplight
  • UL Listed:
  • Wet locations
  • Recommended Use

  • General area lighting
  • Parking lots & walkways
  • Perimeter lighting
  • Typical mounting height

    15 to 25 feet


    5 Year Limited Warranty UL Listed Suitable for Wet Locations Cree LEDs Non-Dimmable Design Lights Consortium DLC Premium
    16100 Lumens
    70 CRI
    320W PSMH / 400W MH
    4-1/5" H x 16-1/5" W x 16-1/5" L
    Estimated 127,000 hours of maintenance-free operation to L70 at 25˚C (77˚F)
    Universal (120V through 277V Operation)
    There are no accessories for this product.

    in reference to light distribution what is type 2 & 3 ?

    Asked by: supreme 306
    The Type III, V, and VII distribution pattern area lights we offer is referring to a specific IES pattern in regards to distribution pattern. Please consult a lighting engineer or call our customer service department at 1-888-243-9445 for further explanation or details.
    Answered by: Janelle V
    Date published: 2017-09-25

    This item is shown with a slip pipe fitting. Does it come with this particular light?

    Asked by: jerk
    All mounting hardware for this fixture is sold seperately. Here is a copy of the spec sheet: http://www.e-conolight.com/pdf/SpecSheets/eco_spc_sba3_series1.pdf. All compatible mounting hardware can be found on the third page.
    Answered by: Janelle V
    Date published: 2017-09-11

      Will this put out a flood light pattern tilted up at 75 degrees? It would be installed at 14 feet above ground. 

    Asked by: jlr280
    To determine the light spread for your application space, please see our Outdoor Lighting Layout Tool, and use our Outdoor Calculator: http://www.e-conolight.com/resource_center/resources/lighting-layout-tool. If further assistance is needed, please contact customer service at 888-243-9445 to speak with one of our representatives.
    Answered by: Janelle V
    Date published: 2017-08-14

    Can I wall mount a E-SBA3L110CZ using the back box E-ACAPABB attached directly to the fixture.

    Asked by: Mike Oak
    Our SBA series fixtures cannot be used with a back box. Please note that specifically the E-ACAPABB is ONLY for use with E-APA12/E-APA23 & E-AL1L/E-AL2L Series only.
    Answered by: Janelle V
    Date published: 2017-08-09

    Can I use a E-ACE direct arm bracket to mount the Shoebox Area Light E-SBA3 Series | 5000K | Dark Bronze to a 4" pole .

    Asked by: Mike Oak
    This fixture CANNOT be used with the E-ACE. If using a mounting arm, you will need to use the E-ACESB. Here is a link to view it: http://www.e-conolight.com/6-inch-mounting-arm-shoebox.html. The fixture would lose its UL listing with the E-ACE. The E-ACESB is specifically for this style fixture. For additional questions or concerns, please contact our customer service department at 1-888-243-9445.
    Answered by: Janelle V
    Date published: 2017-08-08

    Cost of slip fit

    Asked by: Penn
    The E-ACS slip fitter can be used with this fixture. To view the price and details please click here---> http://www.e-conolight.com/2-adjustable-slip-fitter.html
    Answered by: Janelle V
    Date published: 2017-08-07

    Can the E-SBA Series Shoebox area light Be made to be Vandal Resistant or is there a comparable Vandal Resistant fixture Available?

    Asked by: TDK3
    We do not carry any vandal resistant outdoor LED fixtures at this time.
    Answered by: Janelle V
    Date published: 2017-07-26

    Im trying to download the IES file to use in my Visual Lighting software. Can I get a copy of the 4k file

    Asked by: Corin
    The .ies file for this fixture can be found under the "specs and guide" tab. Here is a copy: http://www.e-conolight.com/pdf/photometrics/e-sba3_series_40k.ies You must save this to your desktop and then open in from your launched lighting program. For additional questions, please call our customer service department at 1-888-243-9445.
    Answered by: Janelle V
    Date published: 2017-07-25
    • y_2017, m_10, d_20, h_24CST
    • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_8
    • loc_en_US, sid_E-SBA3, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_econolight