888.243.9445 M-F 6AM-7PM CST

Free shipping over $500

E-conolight 120-volt Button Photocell Light

Photocell – Button, 120V

Review configuration
In stock
Specs & Guide


120-volt Photocell – Button. Field installed. Nylon light control shield included.

Recommended Use

  • Floodlights – with adjustable fitter mount
  • Wall Packs – back box field drilling required
  • < 1000W fixtures
    There are no accessories for this product.

    What is the minimum wattage lamp/ light that this will reliably work with? I have some 12 watt LED's I'd like to use them with..

    Asked by: jmjmjmjmjm
    We typically recommend using this accessory with LED fixtures of 24W or greater. Please call 888-243-9445 for additional assistance.
    Answered by: Lauren P
    Date published: 2016-05-19

    Hi, if we just wanted to purchase the photocell without the fixture can we do so?

    Asked by: sue1
    Yes, photocells can be purchased separate from a fixture. The SKU for a 120V photocell is E-ACP1. The SKU for the 208V-277V is E-ACP2.
    Answered by: Lauren P
    Date published: 2016-05-12

    Do these photocell burn out?

    Asked by: Kobipet
    This accessory has a 5-year limited warranty.
    Answered by: Ashley H
    Date published: 2016-05-09

    will it work with 24 volt source

    Asked by: sheldon
    This photocell is for use with a 120V source. We also offer the E-ACP2, which is for use with a 208V/240V/277V source.
    Answered by: Ashley H
    Date published: 2016-04-01

    I am planning on buying about 24 of the E-WP9 Series lights to replace the HP Sodium lights I currently have. They are controlled by 8 light sensing controls. Can these SKU: E-ACP1 control multiple lights?

    Asked by: DonB
    Yes, this photocell should be able to handle up to 8 of the E-WP9 series wall packs.
    Answered by: Ashley H
    Date published: 2016-03-15

    Forgive my ignorance but this can be spliced directly into a 120v power cord and used too dim a shop light on the end of the same cord? Or do they have to be hardwire?

    Asked by: Dallas
    This photocell is for outdoor use. It would need to be hardwired into an e-conolight fixture (using the installation instructions provided) to enable the fixture to turn on at dusk and off at dawn.
    Answered by: Ashley H
    Date published: 2016-01-19

    Can this photocell be mounted through one of the 1/2" NPT knockouts for fixture E-WP9L09CZ?

    Asked by: Vince4612
    This photocell can be field installed into the E-WP9L09CZ.
    Answered by: Ashley H
    Date published: 2015-11-24

    I need to know the dimensions of this photo cell.  Length, Width, Height, and diameter of the sensor/probe.   Thanks.....

    Asked by: Pickles
    The photocell box (not including sensor dims) is: 3/4" Depth x 1" Width x 2" Height The photocell box (including sensor dims) is: 1-1/2" Depth x 1" Width x 2" Height The photocell sensor's diameter is: 3/8"
    Answered by: Ashley H
    Date published: 2015-11-10
    • 2016-05-25T08:51CST
    • bvseo_cps, prod_bvqa, vn_cps_3.2.1
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_17
    • loc_en_US, sid_E-ACP1, PRD, sort_recentAnswersFirst
    • clientName_Econolight
    Photocell – Button, 120V 0 out of 1 5 based on ratings. user reviews.