888.243.9445 M-F 6AM-7PM CST

Free shipping over $500

LED Area Light - Type III, 12,500+ Lumens | e-conolight

$249.99
SKU: E-AL1L315

* Required Fields

 
Ratings
Details
Specs & Guide
Accessories
Reviews
Q&A

Overview

Replaces 250-watt pulse start metal halide (PSMH). 155-watt LED Area Light - Type III with 12,500+ delivered lumens. Available in cool white (5000K) and neutral white (4000K). 5-year limited warranty.

Features

  • Order mounting separately (E-ACE 6” mounting arm, E-ACU U-bracket, or E-ACS 2”slip fitter)
  • Estimated 76,000 hours of maintenance-free operation to L70
  • Non-dimmable
  • Low-copper, durable die-cast aluminum housing
  • Dark bronze polyester powder-coat finish for extra corrosion protection
  • Fixed cutoff glare shield reduces light pollution
  • Tempered glass lens, thermal shock and impact resistant
  • Patented lens design delivers IES Type III distribution
  • Mounts directly to recessed junction box with included mounting plate
  • Operating temperature range: -22°F - 104°F
  • Universal voltage (120V through 277V)
  • UL listed for wet locations
  • For use in 0° orientation (downlight position) only
  • Fixture comes without mounting, ordered separately
  • Cree® LEDs inside
  • Recommended Use

    Parking lots, roadways, walkways, and general area lighting. Also effective as a wall-mounted security and perimeter light.

    Typical mounting height

    15 to 25 feet
    LIGHT OUTPUT
    10,880 lumens
    COLOR ACCURACY
    ≥ 70 CRI
    DIMENSIONS
    4-7/8" x 13-7/8" x 17-1/4"
    INPUT VOLTAGE
    120V - 277V
    • 6-inch Mounting Arm
      6-inch Mounting Arm
      $16.99
    • Adjustable U-Bracket
      Adjustable U-Bracket
      $12.99
    • Photocell – Button, 120V
      Photocell – Button, 120V
      $8.99
    • Photocell – Button, 208V/240V/277V
      Photocell – Button, 208V/240V/277V
      $8.99
    • $19.99
    LED Area Light - Type III, 12,500+ Lumens | e-conolight is rated 1.0 out of 5 by 1.
    Rated 1 out of 5 by from Expect a short driver life Purchased 8 month ago-but had to wait to install a few months later. Already 1/2 of a fixture is out (driver failure). although there's a 5 year warranty-Apparently I voided that by enlarging the 2 mounting holes to retrofit to existing pole brackets. My bad-but just beware. Econolite does not have the replacement driver so I'm out of luck on this. Have to buy another whole fixture and hope the others last the 5 years I promised the client.
    Date published: 2016-05-18
    • 2016-12-04T09:31CST
    • bvseo_cps, prod_bvrr, vn_cps_3.4.0
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_1
    • loc_en_US, sid_E-AL1L315, PRD, sort_relevancy
    • clientName_Econolight

    How can we power this lamp or equivalent with our existing 12 V external wiring?

    Asked by: HughL
    This fixture's input voltage is universal (120V through 277V) and cannot be wired to existing 12V .
    Answered by: Ashley H
    Date published: 2016-11-14

    Ref: sku E-4L1L315CZ. I want to mount this light on a square 4" x 20' metal tube post. What else is needed from you to accomplish this?

    Asked by: DeaconTom
    The adjustable U-bracket (E-ACU) and the 6" mounting arm (E-ACE) should work for your application. Please see the instruction manual of these accessories for their dimensions: http://www.e-conolight.com/pdf/Instructions/CI308X30.pdf. If further assistance is needed, please contact customer service at 888-243-9445 to speak with one of our application engineers.
    Answered by: Lauren P
    Date published: 2016-11-10

    will these lights start without a starter using standard 120V current? E-AL1L315CZ

    Asked by: TTOFPOA
    This luminaire draws about 1.25 Amps of current at 120 Vac. This fixture can be powered by 120 Vac voltage.
    Answered by: Lauren P
    Date published: 2016-11-10

    Are poles for lights availabe

    Asked by: Mark t
    Yes, Poles and Bullhorns are available at: www.e-conolight.com/outdoor-lighting/poles-bullhorns
    Answered by: Ashley H
    Date published: 2016-10-14

    I'm looking at the E-AL1L315NZ fixture to mount on a concrete surface. In the instruction sheet file on the last page, it shows a box mount diagram and installation instructions. Can I buy this?

    Asked by: Jack R
    The back box, which is what is needed to mount the fixture to a surface, comes with the fixture. It does not need to purchased separately. The fixture may be mounted to a surface in three ways. Please see the Box Mount section on the instruction manual for directions.
    Answered by: Lauren P
    Date published: 2016-09-29

    As for the pole does it have to 15 to 25 ft high.  What about 5 to 10?

    Asked by: Kbrcbs
    The typical mounting height is 15' to 25'. However, every application is unique. We suggest using our outdoor lighting layout tool (http://www.e-conolight.com/lightinglayout), which will provide a visual of how the light will be distributed.
    Answered by: Lauren P
    Date published: 2016-09-28

    I need a 36"-48" short pole-mount for this fixture, ideally one I can attach to the uprights on a 6' high chain link fence. What pole accessories can you suggest?

    Asked by: sparkiest
    The pole accessories that are compatible with this fixture are the 6" mounting arm (E-ACE) and the 2" slip fitter (E-ACS). For further mounting assistance please contact customer service at 888-243-9445 to speak with one of our application engineers.
    Answered by: Lauren P
    Date published: 2016-09-28

    need cut sheet on this model

    Asked by: alfa experts
    Here is link for the spec sheet of this fixture: http://www.e-conolight.com/pdf/SpecSheets/eco_spc_al1l_series.pdf You may also view the spec sheet on the product page.
    Answered by: Lauren P
    Date published: 2016-09-07
    • 2016-12-04T09:39CST
    • bvseo_cps, prod_bvqa, vn_cps_3.4.0
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_33
    • loc_en_US, sid_E-AL1L315, PRD, sort_recentAnswersFirst
    • clientName_Econolight
    LED Area Light - Type III, 12,500+ Lumens | e-conolight 0 out of 1 5 based on ratings. user reviews.