Ruud 6-inch Vertical Recessed Downlight | 13W CFL | New Construction | 120V Electronic NPF Ballast | IC Rated | Air Tight

Special Price $13.49 Was $22.90
SKU: E-RFN6131ES
Add to Quote Go To Accessories

Product Overview

LIMITED SUPPLY - 6-inch Vertical Lamp Compact Fluorescent, Type IC, New Construction Housing for (1) CFL double- or triple tube 13W lamp (Lamps not included) 120V Electronic NPF ballast

Features

  • Lamps are NOT included
  • AIRTIGHT - meets IECC Energy Code. (Less than 2 CFM leakage at 1.57 PSI) Performance tested per ASTM E283-84
  • Ceiling Cut-Out: 6-3/8 in.
  • Plaster Frame: 7-5/8 in.W x 12-1/2 in.L
  • Lamp: One 13W
  • Lamp Base: 4-pin G24q-1 or GX24q-1
  • Minimum Starting Temperature: -18 degree C (0 degree F)
  • 120V electronic NPF ballast
  • UL, cUL listed for use in damp locations (wet location trims available)
  • Thermally protected, fused, 120v electronic ballast with end-of-lamp-life protection
  • J-box is listed for eight (4in - 4out) No. 12AWG (90 degrees C) through-branch circuit conductors and has five 1/2 in., one 3/4 in. and four Romex knockouts with true pry out slots
  • Romex knockouts include built in strain relief - no additional clamps required
  • Pre-installed hanger bars allow housing to be positioned at any point within 24 in. joist span. Score lines provided for easy field shortening to accommodate 12 in. joist span
  • Hanger bars can easily be field repositioned 90 degrees on the plaster frame
  • Hanger bars are designed to fit on to T-Bar spine for quick alignment and can be permanently secured without the need for additional clips
  • Housing adjusts for ceilings up to 1-3/8 in. thick
  • 7-1/2 in. housing height allows use in 2 in. x 8 in. joist construction
  • Sealed and gasketed construction limits air exchange between the ceiling plenum and heated or air conditioned areas - performance tested to ASTM-E283 (Washington State)
  • Meets State of California Title 24 requirements
  • 2-year warranty

Recommended Use

  • For use in insulated ceilings and can be installed in direct contact with insulation.

Guides & Info

Specifications

  • Power Consumption 13W
  • Shipping Weight 2.80 (lbs.)
  • Input Voltage 120V
  • Operating Temperature Minimum -18°C (0°F)
  • Certifications Damp Locations

Customers Reviews

Questions & Answers