Durable die-cast aluminum housingKnockouts provided on back of housing for 1/2" conduit entry, mounting over a 4" square or octagonal, and single gang J-boxes1/2" NPT threaded hubs on three sides for conduit entryNeoprene gasket on back of housing provides a watertight mounting sealSponge cord gasket between housing and lens ensures a watertight sealWhite or clear polycarbonate lens held in place with hidden spring clip assembly120/208/240/277V HX ballast HPFE-coat epoxy primer with five layers of protectionSuper durable medium-bronze powder topcoatUL Listed for wet locations5-year finish warranty, 3-year fixture warranty, 1-year lamp warrantyAssembled in the USA
Fluorescent and some high intensity discharge (HID) lamps contain mercury, a hazardous substance regulated by Federal and State laws. Lamps that contain mercury will be marked with a circled "Hg" and “Contains Mercury”. These lamps must be recycled or disposed in accordance with local, state or federal law. For more information visit www.lamprecycle.com. If you are not the end user of these lamps you may be required by law to inform the purchaser that these lamps contain mercury and must be properly disposed or recycled. Check your State and Local laws for compliance.