888.243.9445 M-F 6AM-7PM CT

Free shipping over $100

4" IC-rated Recessed Can

Optimized for LED Lamps

Finally, an IC-rated recessed housing optimized for LED MR16 lamps – without the large metal enclosure.

  • IC-Rated

    Previously, to get an IC-rated low voltage recessed can, you usually needed to have a large metal box surrounding the housing.
    The 10W magnetic transformer allows for the recessed housing to be in direct contact with insulation without the need for a large enclosure.

  • Optimized for
    LED MR16 Lamps

    Using a magnetic transformer instead of an electronic one limits the interference between electronic components such as LED MR16 lamps and electronic dimmers in the circuit. When used with a recommended leading edge dimmer, it offers superior dimming performance than previous fixtures designed for incandescent lamps.

  • Familiar

    Because there’s no metal enclosure, this allows the fixture to be much smaller than most traditional IC-rated fixttures, making it easier to install in both new construction and retrofit applications.

  • Lower Cost

    And because of the smaller enclosure, you get an IC-rated fixture at a fraction of traditional IC-rated low voltage fixtures.

IC-Rated Optimized for LED MR16 Lamps

LED Optimized Low Voltage Type IC Recessed Can-Remodel


Recommended Leading Edge Dimmers

  • Leviton 6681-I
  • Leviton 6631-LI
  • Lutron CNLV-600P
  • Pass & Seymour 90680

NOTE: The presence of a dimmer on this chart is not a guarantee or warranty of the compatibility of these fixtures in any particular installation. The absence of a dimmer from this chart does not necessarily imply incompatibility.

See below for available Products