Connecticut Utility Lighting Rebates Add Up to Bigger, Brighter Savings

Product NameFinished Good Number
2x2 LED Troffer
2x4 LED Troffer
5" & 6" LED Recessed Retrofit
E-T6C1142WW
E-T6C1143WW
Low-Profile LED Canopy E-CP2L04CW
E-CP2L03CW
E-CP2L04CS
LED Parking Garage Light E-PG1L08CS
LED Exit Signs E-XMDGB2W
E-XMDRB2RCW
E-WMDGB2RCW
E-XPDRBW
E-XPDGBW
E-XESRBA
E-XESGBA
E-XEDRBA
E-XEDGBA
E-XERC
E-XERW
2-Lamp T8 Linear Fluorescents E-LP2T8W Series
E-LP2T8S Series
4-Lamp T8 Linear Fluorescents E-LP4T8W Series
E-LP4T8S Series
4-Lamp T8 Linear Fluorescents E-LP4T8W Series
E-LP4T8S Series

Utility customers in Connecticut who upgrade their lighting to more energy efficient fixtures can reap rewards on both their energy bills and through rebate incentives.

Connecticut Light & Power and United Illuminating both offer significant rebates for reducing wattages by at least 10 percent. Taking advantage of this program is as easy as filling out a form.

The form and instructions are easily accessible through an online PDF that can be filled out on a computer and then printed. UI customers should take note that an additional UI Substitute W9 is required and can be found at www.uinet.com/hvac.

Section I: Customer Facility Information is the project information, where you fill in your customer's information. Every box must be filled out in order for the rebate form to receive consideration.

Section II:Enter your information, filling out every box with the applicable information.

Section III: Check the appropriate box for where the rebate/credit should go; to your customer; to you; or applied as a credit on your customer's electric account.

Section IV: One side of the table is dedicated to your project's current lighting scheme while the other side of the table needs to include all available information about the new lighting scheme you're installing. The measure code can be found on page 3 of the form. THERE MUST BE AT LEAST A 10% WATTAGE REDUCTION FOR EACH FIXTURE FOR THE REBATE TO APPLY.

In addition to the rebate form, contractors/customers need to mail a copy of the invoice for the project as well as their e-conolight receipt. The rebate form requires a customer's signature (this could be either the contractor or the customer's if they are placing the order themselves).

Gary
Article Written by Gary L.

Gary is a Product Line Manager. His goal is to manage the exceptional Troffer and Flat Panel products and make sure that these products maintain optimal performance. As a Product Leader, Gary defines the strategic vision for these product categories. He has a deep passion for working and listening to customer needs that drive innovation.