888.243.9445 M-F 6AM-7PM CT

Free shipping over $100

E-HC2P15QZ | e-conolight

150W PSMH | 12,500 Lumens Floodlight | Dark Bronze

Reg. $89.99
Review configuration
In stock
Specs & Guide


150-watt PSMH Floodlight with 12,500 lumens. Dark Bronze, UL Listed, 1-year limited warranty.
If you liked this product try these.


  • Sturdy die-cast aluminum housing and lens frame, with dark-bronze polyester powder-coat finish
  • Tempered-glass lens is thermal, shock and impact resistant
  • 1/2" NPS die-cast swivel fitter
  • Anodized aluminum reflector
  • UL Listed for wet locations
  • Notice:

    Fluorescent and some high intensity discharge (HID) lamps contain mercury, a hazardous substance regulated by Federal and State laws. Lamps that contain mercury will be marked with a circled "Hg" and “Contains Mercury”. These lamps must be recycled or disposed in accordance with local, state or federal law. For more information visit www.lamprecycle.com. If you are not the end user of these lamps you may be required by law to inform the purchaser that these lamps contain mercury and must be properly disposed or recycled. Check your State and Local laws for compliance.

    Recommended Use

  • Building facades
  • Uplighting for signs & displays
  • Security
  • Storage area lighting
  • Typical mounting height

    15 to 25 feet
    70 CRI
    9-1/4-in x 9-1/4-in x 7-1/8-in
    • 150 Watt PSMH, Medium Base, Clear, Enclosed Rated
      150 Watt PSMH, Medium Base, Clear, Enclosed Rated
    • Conduit Slip Fitter - Dark Bronze for Premium Compact Floodlight
      Conduit Slip Fitter - Dark Bronze for Premium Compact Floodlight
    150W PSMH | 12,500 Lumens Floodlight | Dark Bronze is rated 3.3 out of 5 by 3.
    Rated 3 out of 5 by from Changing voltage extremely inconvenient The requirement that the light must be partially disassembled and new wires fed through the mount in order to change the voltage to meet site requirements more than negates any cost savings. Also, wires labelled for this task are very poorly marked.
    Date published: 2018-03-27
    Rated 2 out of 5 by from Owner I'm not very happy with the lamps that come with the fixture I've replaced 4 and they're only about a month old
    Date published: 2015-02-11
    Rated 5 out of 5 by from Xxxx Excellent light output . Great price. Good quality product
    Date published: 2017-11-16
    • y_2018, m_4, d_22, h_10
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_3
    • loc_en_US, sid_E-HC2P15QZ, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
    • clientName_econolight

    Can you tell me what parts (accessories) exactly that I need to mount this under the soffitt of a house (for use as a residential yard flood fixture)?  Thanks!

    Asked by: Kev in LA
    This fixture has a 1/2" adjustable fitter mount. We recommend using a bell box cover (sold by others).
    Answered by: Ashley H
    Date published: 2015-12-07

    Of course shortly after the warranty we are having issues with these light, I need an ignitor for these light, one is dead and I'm sure more are to follow... Can you please tell me the part number for ignitors that will work for these lights?

    Asked by: Angered
    Catalog #: E-IGM10/P15 ($7.99, in-stock) Please contact customer service at 888-243-9445 to order.
    Answered by: Ashley H
    Date published: 2015-09-09

    Can you recommend a ground mount for this unit (on a concrete base)?

    Asked by: BrianVB
    Please refer to the accessories tab for recommended & applicable fixture accessories.
    Answered by: Nikki
    Date published: 2015-01-22

    What is the current draw of this fixture at 120v?

    Asked by: Lew54
    The starting amps are 1.40 and the operating amps are 1.70. You can also view our ballast line current data here: http://www.e-conolight.com/pdf/BALLAST%20DATA.pdf
    Answered by: Heather
    Date published: 2014-08-20

    What is the comparable NEMA beam pattern of this floodlight? I need (22) floods but need more detail on the beam pattern. Thanks

    Asked by: Mattt
    At this time, we do not have photometric information for this fixture.
    Answered by: Heather
    Date published: 2014-06-24

    1)   Can a "dawn-to-dusk" light control be attached to your model HC2P15QZ?. 2) Please recommend a particular model to illuminate a 27 foot high flag - from ground  level.

    Asked by: Boblight
    Generally speaking, 400W PSMH or equivalent spotlight fixtures are recommended for illuminating flags mounted 20-40 feet high. 400W PSMH spotlight: http://www.e-conolight.com/e-fn2p40sqm.html 144W LED (400W PSMH equivalent): http://www.e-conolight.com/catalogsearch/result/?q=hl6s. Both fixtures can accept a photocell installed in the adjustable fitter.
    Answered by: Heather
    Date published: 2014-04-30

    Can you use High Pressure Sodium bulbs in these also?

    Asked by: skint
    A Pulse Start Metal Halide fixture will not accommodate a High Pressure Sodium bulb. A 150W HPS version of this fixture is available for sale here: http://www.e-conolight.com/e-hc2h151z.html
    Answered by: Heather
    Date published: 2014-04-23

    how do you wire for 110 it has two white wires and a bare wire.

    Asked by: cwsiii
    Answer: You will need to reference your installation instructions. The fixture comes set up for the highest voltage (277) you will need to select the correct wire for the voltage you are using and cap off one of the 277 wires.
    Answered by: Heather
    Date published: 2014-03-06
    • y_2018, m_4, d_22, h_10CST
    • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_11
    • loc_en_US, sid_E-HC2P15QZ, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_econolight