Premium LED Round Canopy Easy Install Guide

Included:

(3) Wire Nuts

Junction box mounting plate

Instructions

NOT included:

(2) Standard Junction Box Screws

Compatible with:

Single Gang Junction Boxes

3-1/2" Octagonal Junction Boxes

4" Octagonal Junction Boxes

4" Square Junction Boxes

Warnings - Caution

Safety installation instructions.

  • DANGER - Risk of shock: disconnect power before installation.
  • This luminare must be installed inaccordance with the NEC or your local electrical code.
  • CAUTION - risk of fire.
  • UL Listed for damp locations.

Step 1

Remove

Remove the "L" bracket screw and release Junction Box Mounting Plate from wireform retainer.

Step 2

Feed Wire

Feed supply wires through Mounting Plate from wireform retainer.

Step 3

Suspend

Suspend the fixture from the Junction Box Mounting Plate (using wireform retainer) for support while making wiring connections.

Step 4

Connect & Cap

Connect & Cap wires as follows:

Phase to neutral wiring 120/277V

  • Connect supply ground to fixture ground (green) lead
  • Connect supply common to fixture neutral (white) lead
  • Connect supply Vin to fixture hot (black) lead

Phase to phase wiring 208/240V

  • Connect supply ground to fixture ground (green) lead
  • Connect supply L1 (Hot) to fixture neutral (white) lead
  • Connect supply L2 (Hot) to fixture hot (black) lead

Step 5

Secure

Secure wires in junction box and lift fixture to ceiling (A). Then, slide fixture horizontally to engage mounting tabs and lock into place (B).

Step 6

Insert

Insert the "L" bracket screw from step one through the L-Bracket to secure the fixture to the Junction Box Mounting Plate.

Step 7

Test

Restore power and test.

Thank you!

Another way is making LED easy.