RUUD® 6-inch Architectural Recessed Horizontal Downlight | 26W (Max) CFL | New Construction | Non-IC Rated

Write a Review
Questions & Answers
Lighting Layout Tool

$5.99 Was $9.95

SKU: E-A6HN27-UT

Product Overview

WHILE SUPPLIES LAST - 26-watt CFL RUUD^® 6" Architectural Recessed Downlight (horizontal). Type Non-IC, new construction housing, UL Listed, 2-year limited warranty. While Supplies Last.

Features

Lamps are NOT included
Snap-on junction box cover plates
Precisely formed non-imaging one-piece reflector design
UL, cUL listed for damp locations
UL, cUL listed for installations where insulation can be kept 3 inches away
Thermally protected in accordance with Article 410 of NEC and UL 1598
1 1/4" deep aperature throat
Oversize, through branch circuit rated, junction box
Mounting brackets are adjustable from above or below the ceiling and have a 5" vertical adjustment
Use 1/" EMT for mounting or choice of optional C-Channel or flat hanger bars
5" vertically adjustable universal mounting bracket
Listed for eight #12 AWG (4in-4out) 90 degrees C feed through branch circuit conductors
Ten 1/2" and four 3/4" knockouts with pry-outs
Eight knockouts with Romex cable clamp
Minimum .98 power factor
THD less than 10%
Meets FCC Title 47 CFR Part 18, Non-Consumer EMI and RFI emission levels
Reflectors are spun aluminum and anodized clear Soft-Vue finish
Above or below ceiling relamping

Recommended Use

For use in new construction applications with non-insulated ceilings or where insulation can be kept 3" from housing.

Guides & Info

Instruction Manual: E-A6HN27-UT Download File
Manuel De Instruccion: E-A6HN27-UT Download File
Spec Sheet: E-A6HN27-UT Download File

Specifications

Certifications Damp Locations
Input Voltage Universal Voltage; lightweight; energy-efficient electronic ballasts with end of life protection
Operating Temperature Minimum 0°F (-18°C)
Power Consumption 13W
Shipping Weight 5.35 (lbs.)
warranty 2 Year